How to classify non-woven masterbatch?

According to the classification of the carrier, such as PE masterbatch, masterbatch ABS masterbatch, polyvinyl chloride masterbatch, masterbatch, etc.

Non-woven masterbatch is classified according to function: such as injection masterbatch, blown masterbatch, spinning masterbatch, etc.

The level and type of non-woven masterbatch can be divided into different levels:

1. Ordinary injection masterbatch:

Used in general daily plastic products, industrial containers, etc. Used in cosmetic packaging, toys, electrical enclosures and other advanced products. Non-woven masterbatch is used for general packaging bags and blown coloring of woven bags.

2. Low level masterbatch:

Used in low-manufacturing products with low color quality requirements, such as trash cans, lower containers, etc. Blown coloring of ultra-thin products.

3. Spinning masterbatch:

It is used for the coloring of textile fiber spinning masterbatch, with fine pigment particles, high concentration, strong tinting strength, good heat resistance and light fastness. According to the variety designated by the user as a plastic product, the same plastic is selected as the carrier to make the masterbatch. Such as pp non-woven masterbatch, ABS masterbatch selected PP, ABS as carrier.

4, non-woven masterbatch universal color masterbatch:

It is also possible to use some resin (usually a low melting point of PE) as a carrier, but it can be applied to the resin color of a resin other than the carrier. The universal color masterbatch is relatively simple and convenient, but has many disadvantages. It is recommended that the user choose a special color masterbatch.

Plastic products that are generally adapted to heat resistance levels can be used with confidence at normal temperatures. Only under the following conditions, can cause different degrees of color, one is the temperature beyond the normal range, one is not too long.