Polypropylene masterbatch serves as key raw material for dope‑dyeing of polypropylene fiber and non‑woven fabric. Besides formula and dispersion performance, storage environment and feeding control greatly affect spinning stability. Many spinning mills focus on factory test reports, while overlook post‑delivery storage and feeding details, which may lead to color difference and spinning faults.
Moisture‑proof and light‑proof storage shall be implemented. Polypropylene masterbatch shall be kept in dry and ventilated warehouse with well‑sealed package against moisture ingress. Damp masterbatch may trigger hydrolysis under high‑temperature melting, generate bubbly yarn and accelerate performance degradation of partial pigments and additives. Different colors and batches of Polypropylene masterbatch shall be stacked separately with clear marks to avoid mixing‑up.
Dust and foreign particles shall be kept away during feeding. Loss‑in‑weight dosing system is preferred for stable mixing ratio between Polypropylene masterbatch and polypropylene chips. For manual pre‑mixing, sufficient homogenization is required to avoid local over‑dosage or under‑dosage and reduce strip‑shaped color difference. Hopper and screw shall be thoroughly cleaned during color switching to minimize influence from transitional material.
Addition ratio of Polypropylene masterbatch varies for different production lines; parameters from other lines cannot be copied directly. Small‑batch trial is required to confirm hue and filter‑pressure before fixing production ratio. For long‑term stored polypropylene masterbatch, color comparison test is suggested before re‑production to check hue shift.
Standardized management covering storage, marking and feeding reduces human‑induced faults, gives full play to coloring performance of polypropylene masterbatch and stabilizes quality of colored polypropylene products.
- Practical Notes For Co‑pro
- Storage And Feeding Management P
- Beyond the "Cardboard" Feel: How
- Dope Dyeing Boosts Formula Devel
- Effect Of Polypropylene Masterba
- Wet‑grinding Technology Bo
- Dispersion Process and Spinning&
- High contact angle = waterproof?
- Evaluation Process From Sample T

